Finder

Product

AGS 1000-1200 EN H mounted sprayers are professional machines, particularly characterized by modern technology and robust construction. This enables the user to spray at higher speeds and to work on large surface areas. These sprayers are fully compliant with strict European environmental and spraying standards. 

FEATURES

AGS 1000-1200 EN H mounted sprayers are professional machines, particularly characterized by modern technology and robust construction. This enables the user to spray at higher speeds and to work on large surface areas. These sprayers are fully compliant with strict European environmental and spraying standards.

  • Tanks with a capacity of 1000 and 1200 l
  • Fully hydraulic boom sets of 15, 16 and 18 m MY H 

FRAME

A robust frame of the sprayer made from high-quality steel ensures a long service life.

Its structural design ensures a short barycentre distance between the tractor and machine, a well-stirred spraying agent mixture, drainage of the tank and a simple cleaning process. The lower support legs mounted on the frame enable appropriate positioning and stability of the sprayer when not attached to the tractor.

A modern powder coating method provides an effective protection of the frame.


FRAME

A robust frame of the sprayer made from high-quality steel ensures a long service life.

Its structural design ensures a short barycentre distance between the tractor and machine, a well-stirred spraying agent mixture, drainage of the tank and a simple cleaning process. The lower support legs mounted on the frame enable appropriate positioning and stability of the sprayer when not attached to the tractor.

A modern powder coating method provides an effective protection of the frame.


MAIN TANK

Capacities of 1000 and 1200 l are available. Modern design with rounded edges, smooth interior walls and inclined bottom ensures complete drainage and efficient cleaning.

The tank is made from chemically resistant polyethylene. It features a large lid with a strainer mounted at the top of the tank to facilitate filling operations. The tank includes an engraved litre scale for easier reading of the quantity of the chemical agent.


RINSING TANK

It is intended for rinsing the main tank and other elements when spraying is finished or interrupted.

The rinsing tank is integrated in the main tank. It can only be filled with clean water. The capacity of the tank is 100–127.5 l.

HAND-WASH TANK

It is designed for washing your hands after handling spraying agents.

The hand-wash tank is incorporated in the main tank. It can only be filled with clean water. The capacity of the tank is 13.7 l.

PUMP

Agromehanika BM 150/20 diaphragm pump is suitable for pumping spraying agents and liquid fertilizers. It is manufactured from factory tested materials. Its 3-year warranty offers an additional quality guarantee.

  • Low-pressure 4-piston diaphragm pump
  • Diaphragms are produced from high-quality NBR rubber.
  • Aluminium casing


PUMP

Agromehanika BM 150/20 diaphragm pump is suitable for pumping spraying agents and liquid fertilizers. It is manufactured from factory tested materials. Its 3-year warranty offers an additional quality guarantee.

  • Low-pressure 4-piston diaphragm pump
  • Diaphragms are produced from high-quality NBR rubber.
  • Aluminium casing


MIXING NOZZLE

It mixes the spraying agent and prevents the build-up of chemical residues on the bottom of the tank.

The nozzle is actuated by a directional control valve mounted on the pump. It is installed in the bottom section of the tank.


FILLING TANK WITH A CONTAINER RINSING NOZZLE

It is designed for thorough mixing and pumping the spray into the main tank. There is a container rinsing nozzle installed inside the filling tank.

The capacity of the tank is 30 l.


EXTERNAL FILLING

The main tank and the rinsing tank can be filled externally.

The main tank is filled by a pump. In addition, the user can also opt for hydrant filling (optional equipment). 


FULLY HYDRAULIC 15–18 MY H

Robust hydraulic boom sets with working widths of 15, 16 or 18 m ensure reliable and efficient operation at high spraying speeds.


  • Hydraulic control from the tractor cab 

The boom set is hydraulically operated by the control panel that provides control over lifting, levelling, and blocking operations, as well as double-sided or individual opening and closing of the left or right boom.

  • Single-point hitch 

The boom set is mounted on a single-point hitch (eye bearing), enabling an even spray distribution and continuous adjustment of the boom to the terrain conditions in all movement directions. Polyurethane springs are installed to ensure lateral shock absorption and optimal response of the boom set to changing terrain conditions.

  • Hydraulic opening and closing of the spray boom set  

It allows simultaneous opening of both sides of the spray boom or individual opening and closing of the left or the right boom. The spray boom set features a safety system to prevent the arms from opening or closing when in working position. The operating speed of hydraulic cylinders is adjustable.

  • Hydraulic lift system

Hydraulic lift system consists of a single-acting hydraulic cylinder. An integrated safety system prevents the spray boom set from suddenly dropping in the event of hose breakage. The hydraulic cylinder speed can be adjusted.

  • Hydraulic levelling or terrain following

Hydraulic levelling can have a significant impact on even distribution of spray to the surface and, as a result, on the spraying quality. This system is highly recommended for uneven or inclined surfaces as it allows for adjustment of the spray boom set to certain terrain inclinations. The operating speed of the hydraulic cylinder is adjustable.  

  • Hydraulic lock with dampers

This system is only used during transport and spraying with partially open boom set (only left or right side). In addition to hydraulic cylinder, the system also features compression springs for additional damping. The operating speed of the hydraulic cylinder is adjustable.

  • Vertical damping with air bellows

Pneumatic vertical suspension provides additional protection against damages to the spray boom set when spraying at higher speeds or on uneven terrains. The vertical suspension system consists of two air bellows and an inflation valve. The bellows are filled with high-pressure compressed air.

  • Transport guards

The boom set includes mechanical guards, preventing uncontrolled opening of side arms in the transport position. Transport guards improve the overall manoeuvrability of the sprayer and thus enable higher transport speeds.

  • Nozzle protection

The boom arms are designed to protect the nozzles from potential damages (impact with the ground or an unexpected obstacle).

  • Safety arm and spring sliders

If the sprayer encounters an obstacle, the rear arm moves away and then automatically returns to the original position. The spring sliders prevent the boom set from hitting the ground if the sprayer undergoes sudden movements.

FULLY HYDRAULIC 15–18 MY H

Robust hydraulic boom sets with working widths of 15, 16 or 18 m ensure reliable and efficient operation at high spraying speeds.


  • Hydraulic control from the tractor cab 

The boom set is hydraulically operated by the control panel that provides control over lifting, levelling, and blocking operations, as well as double-sided or individual opening and closing of the left or right boom.

  • Single-point hitch 

The boom set is mounted on a single-point hitch (eye bearing), enabling an even spray distribution and continuous adjustment of the boom to the terrain conditions in all movement directions. Polyurethane springs are installed to ensure lateral shock absorption and optimal response of the boom set to changing terrain conditions.

  • Hydraulic opening and closing of the spray boom set  

It allows simultaneous opening of both sides of the spray boom or individual opening and closing of the left or the right boom. The spray boom set features a safety system to prevent the arms from opening or closing when in working position. The operating speed of hydraulic cylinders is adjustable.

  • Hydraulic lift system

Hydraulic lift system consists of a single-acting hydraulic cylinder. An integrated safety system prevents the spray boom set from suddenly dropping in the event of hose breakage. The hydraulic cylinder speed can be adjusted.

  • Hydraulic levelling or terrain following

Hydraulic levelling can have a significant impact on even distribution of spray to the surface and, as a result, on the spraying quality. This system is highly recommended for uneven or inclined surfaces as it allows for adjustment of the spray boom set to certain terrain inclinations. The operating speed of the hydraulic cylinder is adjustable.  

  • Hydraulic lock with dampers

This system is only used during transport and spraying with partially open boom set (only left or right side). In addition to hydraulic cylinder, the system also features compression springs for additional damping. The operating speed of the hydraulic cylinder is adjustable.

  • Vertical damping with air bellows

Pneumatic vertical suspension provides additional protection against damages to the spray boom set when spraying at higher speeds or on uneven terrains. The vertical suspension system consists of two air bellows and an inflation valve. The bellows are filled with high-pressure compressed air.

  • Transport guards

The boom set includes mechanical guards, preventing uncontrolled opening of side arms in the transport position. Transport guards improve the overall manoeuvrability of the sprayer and thus enable higher transport speeds.

  • Nozzle protection

The boom arms are designed to protect the nozzles from potential damages (impact with the ground or an unexpected obstacle).

  • Safety arm and spring sliders

If the sprayer encounters an obstacle, the rear arm moves away and then automatically returns to the original position. The spring sliders prevent the boom set from hitting the ground if the sprayer undergoes sudden movements.

AGROMEHANIKA TRI-JET NOZZLE HOLDERS

The spray boom sets are fitted with Agromehanika TRI-JET nozzle holders with integrated nozzle inserts by a renowned German manufacturer Lechler. TRI-JET nozzle holders feature three integrated nozzle inserts, designed for spraying different crops.

TRI-JET Agromehanika nozzle holders are equipped with an anti-drip diaphragm valve to prevent unwanted dripping from the nozzles.


SIGNAL LIGHTS

For safe driving on public roads. The sprayer is equipped with two reflective boards, rear lights with a reflective triangle and two white reflectors installed on the boom set. 


BOOM SET CONTROL

Thanks to the control panel, the boom set can be controlled from the tractor cab. It is operated by tractor hydraulics.

The hydraulic system is used to control lifting, levelling or terrain following, locking and simultaneous or individual opening of the left or the right boom.


BOOM SET CONTROL

Thanks to the control panel, the boom set can be controlled from the tractor cab. It is operated by tractor hydraulics.

The hydraulic system is used to control lifting, levelling or terrain following, locking and simultaneous or individual opening of the left or the right boom.


AG-TRONIK 14 SPRAYING COMPUTER

AG-TRONIK is a modern computer manufactured by Agromehanika which is used for monitoring and automatic adjustment of spray volume per hectare. It makes the spraying process easier, more accurate and more efficient.

  • Thanks to AG-TRONIK, the user’s attention can really be focused on driving.
  • Monitoring and automatic adjustment of dosage per hectare are controlled by a flow pressure regulator and a speed sensor.
  • It is operated from the tractor cab.
  • It can be operated automatically or manually. Spraying is controlled by electric motors.
  • All important data is simultaneously displayed on the main screen.
  • A number of parameters can be adjusted according to user requirements.
  • The spraying data can be saved or transferred to PC's, laptops and tablets by using an SD card.
  • The system can be connected to GPS navigation. 

PARTIAL CLEANING

Partial cleaning of the sprayer does not affect the spray content in the main tank. Such cleaning is very useful if spraying is interrupted for various reasons (lack of time, weather conditions etc.).

Partial cleaning includes cleaning the suction filter, the pump, the pressure regulator and nozzles. The sprayer can be easily adjusted for partial cleaning. Clean water is pumped from the rinsing tank by means of a pump. It is recommended to clean the machine after each use.

PARTIAL CLEANING

Partial cleaning of the sprayer does not affect the spray content in the main tank. Such cleaning is very useful if spraying is interrupted for various reasons (lack of time, weather conditions etc.).

Partial cleaning includes cleaning the suction filter, the pump, the pressure regulator and nozzles. The sprayer can be easily adjusted for partial cleaning. Clean water is pumped from the rinsing tank by means of a pump. It is recommended to clean the machine after each use.

FULL CLEANING

The sprayer should be fully cleaned after each spraying. This contributes to cost-effective spraying and environmental protection.

It removes all spray residues from the sprayer. Full cleaning includes the cleaning of all interior parts of the sprayer, consisting of the main tank, the suction filter, the pump, the pressure regulator and the nozzles. The sprayer is easily adjusted for full cleaning. Clean water is pumped from the rinsing tank by means of a pump. 

SUCTION FILTER

The suction filter is used for spray filtration. In addition, it also removes larger particles from the spray that could cause problems during spraying.

The suction filter is installed between the main tank and the pump. The filter insert features a density of 50 MESH. It is recommended to clean the suction filter before each filling of the main tank.


SELF-CLEANING PRESSURE FILTER

The self-cleaning pressure filter provides additional filtration of the spray before it enters the nozzles and allows uninterrupted spraying.

It is located on the sprayer's pressure regulator. The filter insert features a density of 50 MESH. The pressure filter should be thoroughly cleaned after spraying.


NOZZLES FOR INTERIOR CLEANING OF THE MAIN TANK

The nozzles are designed for cleaning the interior surface of the main tank after spraying. They further remove any spray residues, thus contributing to cost-effective spraying and environmental protection.

The nozzles are installed inside the main tank. They are actuated by a directional control valve mounted on the regulator. Clean water is pumped from the rinsing tank. 

QUICK HITCH

The quick hitch system provides faster and easier attachment of the sprayer to the tractor.

It is designed to lock automatically once the tractor link arms are raised to the sufficient height. 


SATELLITE GPS NAVIGATION


In combination with AG-TRONIK 14 spraying computer, the G7 Farmnavigator navigation system ensures controlled and accurate spraying, while the user can entirely focus on driving. It saves time and spray costs



The GPS navigation system detects:

  • intermediate routes where spraying has already been completed,
  • driving outside the boundaries of the marked surface,
  • arrival to final destination.

The GPS navigation system ensures:

  • automatic opening and closing of the spraying sections,
  • spraying at night,
  • data storage.

MAIN TANK FILLING

The non-return valve prevents the spray from spilling from the tank.

The float valve mechanism installed on the main lid allows air to escape to prevent damages to the main tank during external filling.

LECHLER NOZZLE INSERTS

The German manufacturer Lechler ranks among the Europe's leading manufacturer of nozzles for agricultural applications. The Lechler nozzles follow the latest trends in agriculture, enabling efficient and accurate spraying.

A wide range of available nozzles according to plant varieties, materials and standards. Modern nozzles for reducing the “drift” effect (off-target spray diffusion).

Lechler products have been tested and certified by the German Federal Research Centre for Cultivated Plants JKI (www.jki.bund.de).


SUCTION BASKET

The suction basket is designed for pumping water from ponds, streams and wells.

Water is pumped into the main tank through the filter, the pump and the regulator.

The suction basket is easily attached using the bayonet fitting under the main tank.


EXTERNAL CLEANING KIT

We recommend cleaning the exterior of the machine after each spraying. This ensures uninterrupted operation of the machine by removing the residues of the aggressive chemicals.

Cleaning should be performed at the edge of the area that was sprayed. The kit includes a spraying lance and a hose with a connection fitting. The kit is attached to one of the valves mounted on the regulator.


MARKER

The foam marker is used to mark the boundaries of surfaces that have already been treated. This enables the operator to identify and distinguish between treated and untreated areas.

Foam balls with a diameter of 10 to 20 cm form a line that marks the edge of the treated area. Depending on the marker's adjustment, the border is marked every 5-20 seconds.


Ø 100 MANOMETER

The Ø100 manometer is much larger than conventional manometers, enabling the operator to read the pressure faster and from a greater distance.


Subscribe to our newsletter

Subscribe to our newsletter and be the first to find out about new developments, events and special offers


Plačilne kartice
Plačilo s plačilnimi karticami je mogoče
preko plačilnega sistema Nestpay.



Go to top of page